High Capacity Two-Bed Cartridge (Straight Nipple) for LabStrong™ Water Purification Pretreatment System

The LabStrong 50161027 High Capacity Two-Bed Hose Straight Nipple Cartridge is an economical way to purify water volumes up to 1.9 liters per minute. The water purification cartridge is suitable for small volume applications such as deionization. The hose straight nipple cartridge is an economical alternative for all laboratories and is simple to install.

The cartridge life capacity is indicated by resin color change. The resin color will change from purple to light brown, which indicates that the cartridge is exhausted. LabStrong takes extra care in sealing our water purification cartridges multiple ways, ensuring exceptional quality is maintained throughout the two year shelf life. Each cartridge has fitted sealing plugs/caps placed on both ends and then it is further sealed in a bag – the combination of which dramatically inhibits drying out of the resin.

Specifications:

Part Number: 50161027

Product Type: Water Purification Cartridge

Compatible With: Water Purification Stills

Grain Capacity: 1,867 grains

Max Inlet Water Pressure: 30 PSI (Cartridge itself is capable of handling this pressure, but few if any hose/clamps attached to the hose nipple are reliable at this pressure. Any shutoffs must be upstream of the cartridge. Cartridge should not be under pressure when it is not delivering water.)

Max Flow Rate: 1 liter per minute

Physical Dimensions (Diameter x Length): 3.38 x 18.19 inches

Hose Barb Connection Size: 3/8 inches (Straight)

Resin Color Change Indication: Yes

Flow Type: Up

Shelf Life: 2 years

Temperature Range: 40 to 120 degrees Fahrenheit (Warning: Do Not Allow Cartridge to Freeze)

Resin: Two-Bed Resin

Type: High Capacity

Characteristics: Removes ionized impurities, produces a larger quantity of water to a 50,000 ohms endpoint than that of the Ultrapure 50161385, however at a lower resistivity.

- Proudly Made in the United States of America -